top of page

Adavanced Settings

If you wish to change the factory settings on your SpeedBox™️ 200 or 500 machine, please follow the instructions below.

WE DO NOT RECOMMEND AND STRONGLY URGE AGAINST CHANGING THE FACTORY SETTINGS. IF YOU DO, YOU DO SO AT YOUR OWN RISK AND PACK STUFF LTD IS NOT LIABLE FOR THE RESULTS. WE DO OFFER FREE TELEPHONE SUPPORT SHOULD YOU REQUIRE ASSISTANCE.

1. Press and hold the FUNCTION button for 3 seconds.
2. Change the display from P000 to P808 using the UP/DOWN/LEFT/RIGHT buttons.
3. Press CONFIRM.
4. Change the display from P000 to P660 using the UP/DOWN/LEFT/RIGHT buttons.
5. Press CONFIRM.
6. You are now in parameter mode and it should display S 00.
7. Click the FAST, MEDIUM or SLOW buttons to begin assigning new settings to this button.
8. Now press UP/DOWN to select a code between S 00 and S 13 then press CONFIRM to enter that setting.
9. Change parameter settings using UP/DOWN, move across using LEFT/RIGHT and save with CONFIRM.

Improve efficiency with setting from linear weigh head manual
bottom of page